Specifications
Device Features
Buttons and Settings
Unit
—This button changes the units from
Fahrenheit to Celsius. When the button light
is on, the unit is in Celcius.
Voice
—Turns the voice feature off. When the
button light is on, the voice feature is off.
Info
—First push shows how many readings
have been taken. Second push will give how
many high temperature readings, and third
push will be back in normal operation.
Press the Enter button to begin the setup. Scroll through the parameters on the
LED display by pressing the up and down arrow buttons. Select the parameter by
pressing the Enter button. The selected parameter will be shown on the LED dis-
play. Press the up or down arrow buttons to set the desired function value, and
press the enter button once more to confirm the selection. The selection will be
saved and the LED display will return to the measurement display mode. Below
are the adjustable parameters:
Code
Function
Description
Factory Settings
HI
Hi Temp
Temp above this value turns red light on and
gives voice indication of high temperature.
99.1°F/37.3°C
AL
Alarm
Temp above this value turns on yellow light
98.6°F/37.0°C
Lo
Low Temp
Temp above this value (but below HI and AL)
will give green light and voice indication of nor-
mal temperature.
89.6°F/32.0°C
Ad
Adjustment
For calibration of the reading, adjustable range
-3.6°F to +3.6°F (-2.0°C to +2.0°C)
0
Co
Voice Set
Sets voice report “0” brief, “1” detailed
1
UO
Volume
Volume range 5-30
22
CLO
Clear Results
Clears the total number of results
Function Buttons
Programming
Buttons
Audio
Power Button
and Power Jack
Display
Infrared Temperature
Sensor
Temperature
Indicator
Lights
Motion Sensors
Reset
Button
Temperature Range: 86-113°F (30-45°C)
Accuracy: T/- 0.18°F (0.2°C) , M/- 0.36°F (0.2°C)
Power: 100-240 VAC with provided power cord
Batteries (optional): Rechargeable, 50 hours on full charge
Enclosure: ABS
www.theroscan.com
www.theroscan.com
