Sensitron STG/OUT16-S2, Instruction Manual

Page: 10 / 11

ENGLISH
Pag. 7
DEC HEX DEC HEX DEC HEX DEC HEX DEC HEX DEC HEX DEC HEX
27 1B 64 40 101 65 138 8A 175 AF 212 D4 249 (*) F9
28 1C 65 41 102 66 139 8B 176 B0 213 D5 250 (*) FA
29 1D 66 42 103 67 140 8C 177 B1 214 D6 251 (*) FB
30 1E 67 43 104 68 141 8D 178 B2 215 D7 252 (*) FC
31 1F 68 44 105 69 142 8E 179 B3 216 D8 253 (*) FD
32 20 69 45 106 6A 143 8F 180 B4 217 D9 254 (*) FE
33 21 70 46 107 6B 144 90 181 B5 218 DA 255 (**) FF
34 22 71 47 108 6C 145 91 182 B6 219 DB
35 23 72 48 109 6D 146 92 183 B7 220 DC
36 24 73 49 110 6E 147 93 184 B8 221 DD
37 25 74 4A 111 6F 148 94 185 B9 222 DE
4. STG/8REL relay board (optional)
The STG/8REL 8-relay optional expansion board converts STG/OUT16 O/C outputs into
voltage free changeover contact. Up to two relay boards can be connected to each output
module. A relay board is directly connected to the output module (J1 connector) and a
second relay board is connected to the first.
Figure 3) Relay board connection
If the STG/8REL boards are not connected, it is necessary to close pins 4 and 6 of the J1 con-
nector of the STG/OUT16 board. By default they are already closed.
NC C NO
Out 2
Out 3
Out 4
Out 1 Out 9 Out 10 Out 11 Out 12
Out 8
Out 7
Out 6
Out 5
Out 16 Out 13 Out 15 Out 14
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
NC C NO
NO C NC
NO C NC
STG/OUT16-S2 Module
Open Collector outputs
WARNING!