SENSIRION SEK-SVM4x, Quick Start Manual, Page: 15 / 19

© Copyright Sensirion AG, Switzerland Confidential
Changing the temperature offset
You can change the temperature offset by entering a new value
under the
Device Parameters section and subsequently pressing
the Apply button (1).
You can check if such compensation is needed by comparing the
temperature raw value of the SVM41 with the temperature
measured by an SHT on an FPCB (
e.g. , from a SEK-SHTxx)
when placing both next to each other. The difference between
both sensors is the temperature offset.
If you want the temperature offset to be saved permanently on
the SVM41 press the
Store button at the bottom (2).
1
2