SENSIRION LD20 Series, Operating Manuallines, Page: 3 / 18

Operating Guidelines for Liquid Flow Meter Kits
www.sensirion.com Version 1 – D1 – June 2019 page 3/18
1 Introduction
The Sensirion liquid flow meters allow (ultra-)low liquid mass flows to be measured at low power consump-
tion and with a very fast response. The inert and biocompatible flow meters feature outstanding sensitivity
and a unique dynamic range. Moreover, they are fully calibrated, temperature compensated, and provide a
digital output signal. This can be accessed via Sensirion’s smart SCC1-USB Sensor Cable (included in all
kits) with serial communication. The liquid flow meter can be controlled from your PC with the supplied
Windows Sensirion Viewer Software.
2 Getting Started
Sensirion`s
Liquid Flow Meter Kits contain the following components:
Evaluation Kit for
SLF3x Series :

SLF3S-1300F liquid flow sensor

SLF3x mounting clamp to enable mechanical fixation of the sensor
 SCC1-USB Sensor Cable with USB connector for plug-and-play to a PC

Adapter cable from 6-pin connector to 4-pin M8, 15 cm
 Ribbon cable from 6-pin connector to pigtail, 30 cm

A set of fluidic connectors

Quick Start Guide
Evaluation Kit for the
LD20 Series :
 LD20-xxxx liquid flow sensors

Prototype connector block with 4-pin M8 connector for electrical connection

SCC1-USB Sensor Cable with USB connector for plug-and-play to a PC
 Quick Start Guide
The kits offer an easy-to-use environment to implement high-end sensing technology in your laboratory
setup with data visualization and data collection that can be set up within a couple of minutes.
For detailed technical specifications of your liquid flow meter please see its specific datasheet.