SensAlert Plus Moisture Barrier Install Instruction
To remove the Moisture Barrier.
1) Follow steps 1 and 2 above to remove the Sensor Holder from the Transmitter.
2) Remove the Sensor Shield (or Rain Shield) from the Sensor Holder. Turn the Sensor Holder over
to remove Moisture Barrier. If the Moisture Barrier fails to drop out, The Sensidyne magnetic
screwdriver or a similar small screw driver can be used to push into the half moon access slot in
the top of the Sensor Holder (at the edge of the sensor opening). This will push the Moisture
Barrier out of the Sensor Holder without breaching the barrier material.
Sensidyne, LP
1000 112
th
Circle N, Suite 100
St. Petersburg, Florida 33716 USA
800-451-9444 • +1 727-530-3602 • +1 727-539-0550 [fax]
web:
www.sensidyne.com
• e-mail: