Programming
•
The Program Mode is accessed by pressing the set/Cal
key three times.
•
A program is activated by pressing the up arrow to
display a “1”
•
To create a new program press Enter, and enter values
for the following parameters
•
1) A delayed start
•
2) Up to four run times of various duration
•
3) Up to four delay-run times to determine holds between
runs
•
4) Number of cycles
Summary of Contents for Gilian 5000
