Section 4 - Kiosk Display Interface
The QRATE Scanner 3300 touch screen display allows you to view the real-time measurements for up to 32 selected pa-
rameters, and gives access to the web interface to configure the device. If the User Configured Device Display is enabled,
the parameters scroll continuously through the 5 fields provided. The screen may show Flow Run 1 Summary or Flow
). Otherwise, the screen will simply show both summaries (
).
Power button:
-Reboot display
-Soft restart
-shutdown display
User Configured Device
Display enabled/disabled
Configure display
Go to web interface
Flow Run Panel
Flow Run 1
Flow Run 2
Toggle to automatically
cycle between flow
runs
Figure 4.1 -
Touch Display; User Configured Device Display enabled
Kiosk Display Navigation
The kiosk display has two primary functions: to display real-time measurements and/or flow runs, and to configure the
QRATE Scanner 3300 through the web interface. In order to simplify the device operation and configuration, there are
four navigation buttons at the top of the screen:
Power Button
The power button, located in the top-left, may be used to reboot the display, do a soft restart of the display, or shutdown
the display. None of these options will affect the main circuit, but are only for the touch screen display.
•
Reboot Display.
Restarts the Android operating system and the physical display. The network connection will stop
functioning until the Android reboot is complete.
•
Soft Reboot.
Restarts the application running on Android, but leaves the Android operating system and the physical
display running. This will not affect the network connections.
61
QRATE Scanner 3300 integrated control flow computer
Section 4
