Locate critical dimensions and minimum distance for 5EL assembly (Fig 1)
Installation Guide -- Horizontal installation
Door
Pre-drill 2 mounting holes
3/32" [2mm] drill
The slotted holes will allow for gap adjustment.
1/8" to 3/16" door gap
[3 to 5mm]
1/16
"
[1.59]
15/16" [23.5]
1/4" [6.4]
min.
1/4" x 5/8" [6 x 16]
Pre-drill hole for cable
and for manual override
Use slots to
locate position
then secure
using round holes
Figure 1
Transferring striker location to drill door (Fig 2)
Detail J
Scale 1:2
Far side door
X
X
Y
Y
Detail H
Scale 1:1
Locate the centerpoint of the lock and
transfer this dimension to the door.
Drill the 9/16" diameter hole into the door
frame and install the bushing.
Door strike guide
Figure 2
Model 5EL
Electronic Lock for Casework
Sliding Doors.
2