CHARGING
The headset should be regularly charged. To charge your headset
connect the charger to the headset and connect to the mains power.
While charging the Right Indicator LED will be
Red.
When charging is complete the LED will turn
Green.
If
battery is low
, the LED will
flash Red
(when the unit is turned on)
Note:
Be sure to charge your headset fully before first use.
Note:
Your headset will automatically power up when the
charger is connected to the headset.
Charge Time:
5 hours
Battery Life:
24 hours
HEADSET BUTTONS
Power on / off
To power up your headset press and release the power button.
To power off your headset press and hold the power button until the
unit powers off.
Volume up / down
Volume buttons are on side of earmuff above power button. Each press
raises the volume one notch. You will hear a single beep in your ear.
Once you reach the highest volume level, you will hear a double beep.
Multi-function button
The multi-function button is on left side of earmuff and can be enabled
for following features:
•
Push-to-Talk (PTT) when in Short-Range and external PTT is
not attached
•
Latching PTT (also called “sticky PTT”) feature for continuous
“hot mic” communication
•
User setting changes per SM1P manual
SmartGroup
QUICK START GUIDE
