Dokument
UMA0132
Rev
3
Sid
6 (16)
Push Button Operation for
aSENSE mIII
This sensor has two push buttons, MENU and ESC. The YELLOW LED will
acknowledge a successful push by a short flash. The push button MENU is available
for selection of display value or maintenance commands, whereas ESC is available
to escape back from a selected level.
Figure 6 The sensor with push buttons
Figure 7 The push button MENU is pushed
Figure 8 The push button ESC is pushed
Figure 9
The ENTER command is done by pushing
buttons MENU and ESC at the same time for
about 14 seconds
Display modes
In DISPLAY MODE the
DEFAULT
operation is that the sensor alternates between
carbon dioxide and carbon monoxide readings
presentation. The push button
MENU(+) is used to select the indicated value on the display to be
the error code
or
the set points of temperature and CO
2
After power up the display will always return to
ESC
MENU
ESC
MENU
ESC
MENU
ESC
MENU
