| IoT-Gateway-00 SERIES
12-24V DC POWERED OPERATING MANUAL
C
opyright © 2021 Sensata Technologies, Inc.
Page 8
5.1.5 Read HL
The Read HL setting is the time between reading the four High Level wired analogue
inputs. This should be set to how often you require data to be stored for these input
types. The default setting for this is 0s and this means these inputs are not read when the
IoT-Gateway si first powered up.
5.1.6 Read Dig
The Read Dig setting is the time between reading the eight volt-free wired digital inputs.
This should be set to how often you require data to be read for these input types. The
default setting for this is 0s which means these inputs are not read when the IoT-Gateway
is first powered up.
5.1.7 IoT Technology
This setting selects which types of cellular connection the IoT-Gateway will attempt to
connect with. The choices are as follows:
•
1:
2G, Cat-M1 or NB-IoT
•
2:
2G or Cat-M1
•
3:
2G or NB-Iot
•
4:
2G only
5.1.8 About
Using this menu item allows the following information about the IoT-Gateway to be read
on the display:
•
Serial Number
•
Gateway ID number
•
Software Version
•
Hardware Version
•
Current Date/Time
•
Number of data values stored
5.1.9 About Modem
Using this menu allows the following information on the Modem within the IoT-Gateway to
be displayed:
•
IMEI Number
•
CCID Number
•
Last CSQ value (Cellular signal strength indication)
•
Last update time taken in seconds