Rear Panel
SENSASOUND USA LLC TPO-5300 User’s Manual 9
①
12V trigger switch
This switch enables the amplifier to be opened in two ways. This switch stays in TRIGGER
mode by default. Under this mode, when given 12V input, TPO-5300 will be turned on
automa�cally. When the switch stays in ON mode, it will be turned on by push the power
bu�on in the rear panel.
②
12V output
This output is designed to trigger other amplifiers or equipment by its 12V output.
③
12V input
When given a 12V input, TPO-5300 will wakeup automa�cally.
④
Balance/Unbalanced input select
This switch between Balanced and Unbalanced inputs is designed to select which of the two
inputs that you plan to use.
⑤
Unbalanced input
If you are planning to use RCA connec�ons between your preamplifier and any par�cular
channel of the amplifier, select the RCA input by sliding the input select switch toward the
Unbalanced input.
