SENS-O-LOCK WC9000+, User Manual

Page: 14 / 70

•The connector locks into
the base of the handset.
•To remove the cable,
grasp the textured ring and
pull back. The cord can
now be removed by pulling
directly away from the
handset while keeping the
ring retracted.
•It is important to ensure
that the cable is lined up
correctly with the connector
on the handset.
•Do not attempt to line up
the connector by twisting or
rotating the connector.
•ALWAYS LINE UP THE
NOTCH AND SLOT BEFORE
ATTEMPTING TO CONNECT
THEM.
•The handset can operate
without the cord
connected, but if you notice
any damage to the cord or
the connectors contact
your service provider
immediately.