Senoven SEN 1602, User & Maintenance Manual, Page: 10 / 73

9 SEN 1602 / SENOVEN
1.7 General Informations:

Informations which are located at the following pages will guide you at installation of the oven.

First of all check the parts of oven carefully.

Before the installation determine a safety place for oven.
1.8 Oven Specifications:
SEN 1602
Conveyor Belt Width : 562 mm.
Heating Chamber Length : 710 mm.
Heating Chamber Size : L 710 mm. X W 566 mm x H 72mm.
Conveyor Cooking Area : 0,4 m²
Overall Dimensions for Single Oven
:
Oven Width: 995 mm.
Oven Height: 448 mm.
Total Long: 1555 mm.
Overall Dimensions for Double Oven : L 1555 x W 995 x H 1512
Overall Dimensions for Triple Oven L 1555 x W 995 x H 1616
Chassis Dimensions of the Single oven : Chassis Height 620 mm.
Chassis Dimensions of Triple : Chassis Height 265,5 mm.
Weight : 140 kg.
Transportation Weight : 210 kg.
Transportation Size : L 1530 mm x W 1240 mm x H 700 mm.
Average Gas Usage : 0,68 m³ / saat
Usage of gas : 1,375 m³ / saat
Capacity : 13 kw
Allowable Temperature Range : 150 °C – 300 °C
Conveyor Drive System : 208 - 300 Volt Microprocessor
Conveyor control system.
Cooking Time : 1 dk. – 30 dk. Adjustable
Insulation : 4 Side
Heat Source : 1 Burner
Oven Chamber : Steel (Galvanized)
Steel Enclosure : 430 Stainless Steel
DB Level : < 65 dba
Source : Electricity and Gas
Note: Burner does not heat the oven every moment. Because Oven Protects chamber temperature. If the chamber
temperature is enough, burner shuts down.
1.9 Electrical and Technical Specifications Table:
Electrical and Technical Specifications Table
Voltage Faze N T (PE)
Ampere
Loading
Gas Inlet
Pressure
Capacity
(Kw)
Full
Performance
Gas Usage
Average
Gas Usage
BTU
230 1 1 1 2 21 mbar 13 kW 1,375 m³/
hour
0,65 m³
/hour
40,000
/hour
Power Supply: Mono FAZE, 230 V AC, 50 Hz / 2 Amp: 1Nötr, 1 Grounding
IMPORTANT: Electrical input connection must be connected according to the order of the input terminals.
(PHASE TO PHASE, NEUTRAL TO NEUTRAL, – GROUNDING TO GROUNDING)
Note: Specifications can be changed by Şengün Makina. Above Specifications are given for information.