Senor GTP-250 User Manual Download Page 4

 

Rev. 1.00 

- 4 - 

GTP-250

■ 

EMC and Safety standards Applied 

Product Name : GTP-250 
The following standards are applied only to the printers that are so labeled. 
 
Europe :              CE marking 
North America :       EMI : FCC Class A 
 

■ 

WARNING 

The connection of a non-shielded printer interface cable to this printer will invalidate the 
EMC standards of this device. You are cautioned that changes or modifications not 
expressly approved by the party responsible for compliance could void your authority to 
operate the equipment. 
 

■ 

CE Marking 

The printer conforms to the following Directive and Norms 
 
EMC Directive 89/336/EEC  EN55022 Class A : 1998+A1 : 2000 

EN55024 : 1998:+A1 : 2001 
EN61000-3-2 : 2000 
EN61000-3-3 : 1995+A1 : 2001 

 
Low Voltage Directive 73/23/EEC 

Safety : EN60950-1 : 2001 

 
 

 Waste Electrical and Electric Equipment (WEEE) 

 

This marking shown on the product or its literature, indicates that is should not 
be disposed with other household wastes at the end of its working life, To 
prevent possible harm to the environment or human health from uncontrolled 
waste disposal, please separate this from other types of wastes and recycle it 
responsibly to promote the sustainable reuse of material resources. Household 
users should contact either the retailer where they purchased this product, or 

their local government office, for details of where and how they can take this item for 
environmentally safe recycling. Business users should contact their supplier and check the 
terms and conditions of the purchase contract. This product should not be mixed with other 
commercial wastes for disposal. 
 
 

 Label Material 

 
* Control Label: PC 
* Other Labels: PET 

 

Summary of Contents for GTP-250























Reviews: