EN
FR
IT
N
L
PT
R
U
ZH
ES
D
E
Using the XS WIRELESS systems
XS WIRELESS
| 11
The menu items and their adjustment possibilities
TUNE
menu item
E
Use the UP button
3
or DOWN button
4
to select an unused frequency.
E
Press the
set
button
6
to store your setting.
PRESET
menu item
E
Use the UP button
3
or DOWN button
4
to select a frequency bank.
E
Press the
set
button
6
to store your setting.
E
Use the UP button
3
or DOWN button
4
to select a channel.
E
Press the
set
button
6
to store your setting.
SCAN
menu item
Pressing the
set
button
6
to activate the
SCAN
menu item automatically selects an
unused channel.
To select another frequency bank:
E
Press the UP button
3
or DOWN button
4
.
E
Press the
set
button
6
to store your setting.
Synchronizing a t ransmitt er with t he receiver
The receiver always transfers the frequencies to the transmitter.
E
Switch the transmitter and the receiver on.
E
Keep the
button
7
of your transmitter pressed until the
SYNC
display
M
flashes
on the receiver’s display panel.
E
Press the
button
5
of the receiver to transfer the selected frequency to the
transmitter.
Adjust ing t he squelch t hreshold
Interference of the RF signal due to other transmission links can be eliminated as follows:
E
Switch the transmitter off. The receiver should no longer receive a signal.
E
If the receiver still receives a signal, use the rotary switch for squelch threshold “
SQ
”
B
to increase the squelch threshold so that the signal will no longer be received. If the
signal cannot be eliminated in this way, set the transmitter and the receiver to a dif-
ferent channel.
E
Switch the transmitter on again and check if the receiver receives the transmitter
signal.
You can also synchronize a switched-off transmitter with the receiver. The trans-
mitter automatically switches on during the synchronization process.
If the squelch threshold is adjusted too high, the transmission range will be reduced.
Therefore, always adjust the squelch threshold to the lowest possible setting.
