11
Putting the SR 2020 D into operation
When using several transmitters simultaneously, make sure
that, in order to avoid interference, the distance between the
antennas is sufficient. If necessary, use active transmitter com-
biners (see “Accessories and spare parts” on page 25):
Mounting two
SR 2020 D
side by side
Place the two transmitters side by side upside-down onto a
flat surface.
Align the jointing plate
over the holes in the bottom sides
of the transmitters.
Secure the jointing plate
to the transmitters using eight of
the supplied recessed head screws (M 3x6).
Hook the two rack mount “ears”
to the front panels of the
transmitters.
Secure the rack mount “ears”
to the transmitters using
two of the supplied recessed head screws (M 3x6)
respectively. If you wish to mount the antenna connections
to the front of the rack, use the rack mount “ears” of the
optional GA 3030 AM antenna mount .
Slide the transmitters into the 19” rack.
Secure the rack mount “ears”
to the rack.
You mount...
Active Transmitter Combiner
... 1 transmitter
AC 2
... 2 transmitters
AC 3200