![background image](http://html.mh-extra.com/html/sennheiser/sl-mcr-dw/sl-mcr-dw_manual_1242798002.webp)
SL MCR DW
3
Connecting the receiver
The receiver can output analog and digital audio signals.
The analog audio signal is output via the 3-pin
Analog Out
terminal.
Digital audio signals are output via the
Dante
interface with two RJ-45
sockets. This interface is also used for control and configuration via the
network and for
Power over Ethernet
supply.
The following variants are possible:
►
PoE /
network control
digital audio
PoE /
network control
digital audio
digital audio
PoE /
network control
digital audio
Variant 1
Variant 2
Variant 3