![background image](http://html1.mh-extra.com/html/sennheiser/skp-100-g3/skp-100-g3_instruction-manual_1242963008.webp)
7
Putting the plug-on transmitter into operation
Putting the plug-on transmitter into
operation
Inserting the batteries/accupack
For powering the plug-on transmitter, you can either use two 1.5 V AA size
batteries or the rechargeable Sennheiser BA 2015 accupack.
왘
Slide the battery compartment cover
쐈
in the direction of the
embossed arrow and open the cover
쐈
.
왘
Insert the two batteries or the accupack as shown below. Please
observe correct polarity when inserting the batteries/accupack.
왘
Close the battery compartment.
The battery compartment cover
쐈
locks into place with an audible
click.
Charging the accupack
왘
Remove the BA 2015 accupack (optional accessory).
왘
Insert the BA 2015 accupack into the L 2015 charger (accupack and
charger are optional accessories):
Plugging the plug-on transmitter onto a microphone
왘
Plug the microphone’s XLR-3M socket onto the transmitter’s XLR-3F
socket
쐃
.
왘
Tighten the locking ring
쐇
in the direction of the arrow.
The L 2015 charger can only charge the BA 2015 accupack. Stan-
dard batteries (primary cells) or individual rechargeable battery
cells cannot be charged.
The transmitter uses the microphone body as an antenna – there-
fore microphones with a metal casing should be used for best
signal transmission.
쐈
쐈
쐇
쐃
Summary of Contents for SKP 100 G3
Page 1: ...Instruction Manual SKP 100...