11
Putting the radio microphone into operation
LC display shown on the example of the BA 5000-2 battery pack
Changing the microphone head
Place the appropriate charging adapter
in the charging compartment
of the
charger.
Insert the BA 5000-2 battery pack into the
charging adapter
.
Charging time: approx. 2.5 hrs with the
L 50 charger (dependent on the residual
charge of the battery pack).
The battery pack is carefully charged using the
−Δ
U-method. For
further details, please refer to the user manual of the L 50 charger.
•
6-step LC display for (remaining) battery
pack capacity.
•
Microprocessor-controlled electronics takes
self-discharge of rechargeable cells into
account.
•
The maximum capacity of is reduced due
to natural ageing of the cells. The
BA 5000-2 battery pack measures the
maximum capacity and therefore displays
less than 100% capacity for older cells –
even when they have been fully charged.
Unscrew the microphone head by turning
it in the direction of the arrow.
LOW BATT