![background image](http://html.mh-extra.com/html/sennheiser/skm-5200-ii/skm-5200-ii_instruction-manual_1242283019.webp)
18
The operating menu
By way of example of the “
LOWCUT
” menu, this section describes how to
use the operating
After switch-on
After switch-on, the standard display is shown on the display panel.
Depending on the setting, the transmission frequency, the channel
number or the name of the radio microphone is displayed.
Displaying the menu settings in display mode
In display mode, and with the lock mode activated, you can display the
current menu settings one after the other (see “Overview of the operating
menu” on page 21). After a few seconds, the display returns to the
standard display. With the lock mode activated, the LC display is not
backlit.
Selection mode
Setting mode
Display mode
SET
190
Hz
120
Hz
STORED
MHz
TUNE
SET
SET
SET
LOWCUT
Adjusting the
low-cut-frequency
MHz
FLAT,
120 Hz, 190 Hz
SET
/
ON
MHz
SET
Current
low-cut-frequency
MHz
Current
low-cut-frequency