11
Using the bodypack transmitter
Using the bodypack transmitter
To establish a transmission link, proceed as follows:
1.
Switch the receiver on (see the instruction manual of the receiver).
2.
Switch the bodypack transmitter on (see below).
The transmission link is established and the receiver’s RF level display
“
RF
” reacts.
Switching the bodypack transmitter on/off
왘
Push the two battery compartment catches
and open the battery
compartment cover
.
To switch the bodypack transmitter
on
(online operation):
To switch the bodypack transmitter
off
:
To switch the bodypack transmitter
on
and to
deactivate the RF signal on
switch-on
(offline operation):
왘
Briefly press the
ON
/
OFF
button
The bodypack transmitter transmits an RF signal. The stan-
dard display “
Frequency/Name
” appears on the display
panel. The red
ON
LED
lights up and the transmission
icon
is displayed.
You can switch the bodypack transmitter on and deactivate the
RF signal on switch-on. For more information, see below.
왘
Press the
ON
/
OFF
button
until “
OFF
” appears on the
display panel.
The red
ON
LED
goes off and the display panel turns off.
When in the operating menu, pressing the
ON
/
OFF
button
will
cancel your entry (ESC function) and return you to the current
standard display.
왘
Press the
ON
/
OFF
button
until “
RF Mute On?
” appears on
the display panel.
왘
Press the
SET
button.
The transmission frequency is displayed but the bodypack
transmitter does not transmit an RF signal. The transmission
icon
is not displayed.
Use this function to save battery power or to prepare a bodypack
transmitter for use during live operation without causing inter-
ference to existing transmission links.
ON/OFF
ON/OFF
ON/OFF
SET
MHz
543.200
ew100 G3
MUTE
P
AF