![background image](http://html1.mh-extra.com/html/sennheiser/rs-60/rs-60_instruction-manual_1241049016.webp)
Wireless RS 60-10
Engl
ish
Varnish or furniture polish may attack the rubber feet of the transmitter’s charging
unit. As these could stain your furniture, place the transmitter on a non-slip pad.
If problems occur...
Are all connections properly made?
Are the headphones and sound source switched on and is the volume
correctly adjusted?
Have you charged the accupack for at least 20 minutes?
Are you too far from the transmitter? (if so, move closer)
Choose a different channel.
Adjust the setting with the T
UNE
control.
If the problem persists, please contact your specialist dealer for assistance.
Never open the device!
Only use original Sennheiser spare parts and accessories. Components from
other manufacturers (e.g. for mains unit or accupack) may cause damage to the
device and will invalidate the guarantee.
Accessories
The following accessories are available from your specialist dealer:
Spare accupack
BA 151
Charger
L 151-2
Additional headphones
HDR 60
Technical data
Modulation
FM, stereo
Transmitter
Power supply
12 V DC via plug-in mains unit
Power consumption
approx. 1 VA
RF output power
typ. up to 10 mW
(0.75 mW with 925 MHz version)
Signal-to-noise ratio
typ. > 68 dBA
Frequency range
see type plate located on the bottom of transmitter
Channels
3 (2 with 863 MHz version)
Audio connector
3.5 mm /
1
/
4
" (6.3 mm) stereo jack plug, (925 MHz
version supplied with jack to 2 x phono plug)
Charging compartments
1, for BA 151 accupack
Weight
approx. 186 g incl. accupack
Dimensions
approx. 155 x 153 x 105 mm
Receiver
Max. sound pressure level
100 dB
THD
< 0.5 % (at 1 kHz and nom. deviation)
Power supply
2.4 V via BA 151 accupack
Current consumption
approx. 18 mA
Operating time
more than 4 hrs per accupack
Weight
approx. 160 g incl. accupack
Dimensions
approx. 150 x 80 x 200 mm