3
FR
ES
PT
IT
NL
JP
DE
EN
왘
Place the headphones on the charging cradle of the trans-
mitter. The red LED lights up, indicating that the batteries
are being charged. When the rechargeable batteries are
fully charged, the transmitter switches to trickle char-
ging. The LED flahses slowly.
Using the RS headphone system
4
Switching on the audio source
왘
Switch on the audio source. The transmitter automatically
switches on and off together with the audio source. The
ON
/
OFF
LED lights up green.
5
Switching on the headphones/adjusting the volume
왘
First, set the volume on the headphones to a low level.
왘
Switch on the headphones and set the volume to the
desired level.
왘
Switch off the headphones after use to avoid discharging
the batteries.
6
Optimizing the reception
왘
Press the
TUNE
button on the headphones repeatedly un-
til you have found your audio source.
However, if reception is subject to interference:
왘
Change the transmission channel by setting the switch
at the bottom of the transmitter to another position and
re-adjust the receiver channel with the
TUNE
button on
the headphones. Some electronic devices (e.g. televisi-
ons) can cause interference to your wireless headphone
system. If this happens, increase the distance between
the transmitter and the interference source.
Specifications and
Frequently Asked Questions (FAQs)
왘
Visit our website at www.sennheiser.com.
RS127_84x148_EU_SP7.indb 3
RS127_84x148_EU_SP7.indb 3
01.10.2015 13:40:43
01.10.2015 13:40:43
