Using the headphones
PXC 550-II | 13
Connecting the headphones to a
Bluetooth device
To be able to use the Bluetooth connection, you must register both
devices (headphones and e.g. smartphone) once. This process is
called pairing.
If operation differs from the steps mentioned, also refer to the
instruction manual of the Bluetooth device you are using.
Information on the Bluetooth wireless
connection
The headphones are compatible with Bluetooth 5.0.
If your audio source supports one of the following high-resolution
audio encoding methods, music is automatically played in high audio
quality: aptX, aptX LL or AAC. Otherwise the headphones will play
your music in normal audio quality (SBC).
Paired devices establish the Bluetooth wireless connection immedi-
ately after switch-on and are ready for use.
On switch-on, the headphones automatically try to connect to the
last two connected Bluetooth devices. The headphones can save the
connection profiles of up to eight Bluetooth devices with which they
have been paired.
LED
Meaning
1 red
Rechargeable battery is almost empty
(less than 2% charged)
1 white
Battery is approx. 2-20% charged
2 white
Battery is approx. 20-40% charged
3 white
Battery is approx. 40-60% charged
4 white
Battery is approx. 60-80% charged
5 white
Battery is more than 80% charged
If the LED display does not light up immediately during
charging, clean the charging contacts and charge the head-
phones until the LED display lights up again (> 12).
You can speed up the charging process by charging the head-
phones when they are switched off. For more information on
listening to music using the USB cable, > 30.
When you switch on the headphones for the first time, they
automatically switch to pairing mode.