![background image](http://html1.mh-extra.com/html/sennheiser/mm-550-x/mm-550-x_instruction-manual_1240768014.webp)
Putting the MM 550-X into operation
MM 550-X
| 13
Pairing the MM 550-X with an audio source
When switching the headset on
for the first time
, it will automatically go
into pairing mode. The headset is waiting to be paired with a
Bluetooth
enabled device.
왘
Press the
Master
button
햶
and keep it pressed until the
LED
1
alternately flashes blue and red.
왘
On your audio source, activate the
Bluetooth
function “Add a new
device”.
왘
Proceed as described in the instruction manual of the audio source.
If a suitable audio source is found, the devices will exchange device identi-
fication information. The
LED
1
flashes 3 times blue and you hear an
ascending beep. The devices have identified each other and the headset is
paired with the audio source.
If no device is found within approx. 5 minutes, the
LED
1
flashes
3 times red and you hear a descending beep. The headset will then try for
3 minutes to connect to one of the up to 8 previously paired audio sources.
If this fails, the headset automatically switches off after 60 minutes.
왘
In this case, repeat the necessary steps to pair the headset with the
audio source again.
Disconnecting the Bluetooth connection
The
Bluetooth
button
쐂
is backlit, indicating the current setting. The
backlighting goes off after a short time to conserve energy.
왘
Press any button on the headset to display the current setting of the
Bluetooth
function.
To disconnect the
Bluetooth
connection to the audio source, you can
switch off the headset or the
Bluetooth
function. This setting is retained
until the
Bluetooth
function is switched on again.
To switch the headset off:
왘
Press the
Master
button
햶
and keep it pressed until the
LED
1
flashes 3 times red.
You hear a descending beep. The
Bluetooth
connection is automatically
deactivated. The headset switches off.
To switch the
Bluetooth
function off:
왘
Press the
Bluetooth
button
쐂
and keep it pressed until the
LED
1
flashes 3 times red. You hear a descending beep.
The
Bluetooth
button
쐂
goes off. The
Bluetooth
function is switched
off.
왘
Make sure that your headset is switched off (see “Switching the
MM 550-X off” on page 15).
5
1
1
PIN code
When the audio source prompts for a password or PIN code, enter
the default PIN code “0000”.
1
5
1
쐂