![background image](http://html1.mh-extra.com/html/sennheiser/mm-400-x/mm-400-x_instruction-manual_1241322015.webp)
Putting the MM 400-X into operation
14 |
MM 400-X
Switching the MM 400-X on/off
Switching the MM 400-X on
왘
Press the
Master
button
햶
and keep it pressed until the
LED
1
flashes blue. You hear an ascending beep.
– When switching the headset on
for the first time
, it will automatically
go into pairing mode.
The headset is waiting to be paired with a
Bluetooth
enabled device
(see page 12).
– When the headset
is already paired with an audio source
, the
Bluetooth
connection is automatically established.
You hear an ascending beep and then you hear your audio source.
– When the headset
is already paired with an audio source
but the
audio source
is
switched off
or out of range, the
LED
1
flashes
blue.
The headset will try for 3 minutes to connect to one of the up to
8 previously paired audio sources. If this fails, the headset automat-
ically switches off after 60 minutes.
Switching the MM 400-X off
왘
Press the
Master
button
햶
and keep it pressed until the
LED
1
flashes 3 times red.
You hear a descending beep. The
Bluetooth
connection is automatically
deactivated. The headset switches off.
WARNING
Danger of hearing damage!
Listening at high volume levels for long periods can lead to perma-
nent hearing defects.
왘
Before putting the headset on, set the volume to a low level.
왘
Do not continuously expose yourself to high volumes.
5
1
5
1