11
Using the MM 100
If your
Bluetooth
device does not support the audio/video remote control profile (AVRCP):
왘
You have to operate play, pause, stop and skip via the audio player software of your
Bluetooth
device.
Calling
Provided the headset is switched on, paired and within the transmission range of a mobile phone (see page 9),
you can accept and make calls with the MM 100. When you receive a call while listening to music, the music
automatically pauses and starts playing again after the call has ended.
Accepting a mobile
phone call
When you receive a call via your mobile phone, you hear a ring tone in the headset. If the mobile phone is set to
silent alert or vibrating alert, you will hear no ring tone in the headset.
왘
Press the Play/Pause button
쐊
.
Or
왘
Press the Next button
쐋
or Prev. button
쐇
.
An ascending confirmation beep is heard in the headset. Audio streaming is automatically paused.
왘
Start to talk.
Rejecting call
왘
Press and hold the Play/Pause button
쐊
for 2 seconds.
Or
왘
Press and hold the Next button
쐋
or Prev. button
쐇
for 2 seconds.
A descending confirmation beep is heard in the headset. The ringing stops. Depending on the settings of the
mobile phone or
Bluetooth
device, the call is either rejected or transferred to a voice mailbox.
Ending a call
왘
During the call, press the Play/Pause button
쐊
. A descending confirmation beep is heard in the headset. If
any audio streaming was paused when the call was accepted, it will automatically resume.
왘
Refer to the manual of your mobile phone for information on whether your mobile phone hangs up automat-
ically or you have to hang up manually.
To ...
Press
start playback
pause playback
skip to the next track in the playlist/ folder
skip to the previous track in the playlist/folder
쐊
쐇
쐋
쐊
2 s
쐇
쐋
쐊
Kopie von 090603_MM100_532892_0409_SP7_PRT.pdf 17
04.11.2009 11:16:45
