5
Putting the microphone into operation
Connecting the microphone
Connection data of the MKH 8020:
y
48 V (+/- 4 V) phantom powering (as per DIN 45596)
y
XLR-3
y
balanced
y
25
Ω
impedance
y
1000
Ω
min. terminating impedance
왘
Use a microphone cable with XLR-3 connector to connect the
microphone to the sound recording device. The sound
recording device must provide 48 V phantom powering.
Attaching the microphone using the microphone clip
왘
Select the suitable mounting thread:
– Without thread insert: 5/8" thread
– Thread insert: 3/8" thread
왘
Screw the microphone clip
쐏
to a floor or table stand.
왘
Place the microphone into the microphone clip.
Using the windshield
왘
Slide on the wind shield
쐃
to minimize wind noise.
The wind shield changes the sound only slightly, but
attenuates wind noise by approx. 30 dB.
MKH8020_515894_0607_SP6.book Seite 5 Montag, 23. Juli 2007 10:09 10
Summary of Contents for MKH 8020
Page 1: ...Instructions for use MKH 8020 ...
Page 2: ......
