HSP 4 | 21
Attaching the cable to the cable grip
f
Attach the microphone cable to
the cable grip in the centre of
the neckband.
Note:
When attaching the thin cable, make
sure you also press the small cable
sleeve into the cable grip or the ca-
ble will fall out.
Care and maintenance
NOTICE
Liquids can damage the electronics of the device!
Liquids entering the housing of the device can cause a short-circuit and
damage the electronics.
f
Only use a soft, slightly damp cloth to clean the device.
Cleaning the sound inlet basket
f
To clean or replace the sound inlet basket, carefully pull it from the
capsule.
f
Moisten a small brush (bristle
brush or toothbrush) with isopro-
pyl alcohol.
f
Carefully brush off the sound inlet
basket.
f
Allow the sound inlet basket to air
dry for approx. 1 hour so that the
remaining isopropyl alcohol can
evaporate.
f
Reattach the sound inlet basket
to the capsule so that it locks into
place with an audible click. When
attaching the sound inlet basket,
make sure not to cover the sound
inlet.
EN
DE
FR
IT
ES
NL
COMPLIANCE
Summary of Contents for HSP 4
