16
Replacing the batteries
When the batteries are almost flat, the LED
flashes. When
the batteries are completely discharged, NoiseGard
automatically switches off (fail safe operation). Replace the
batteries or the rechargeable batteries as follows:
Open the battery compartment
by pushing the catch
and open the cover.
Remove the battery.
Insert a new AAA size battery as shown.
Close the battery compartment
. The battery
compartment cover locks into place with an audible click.
Always replace the two batteries at the same time.
Remove the batteries from the battery
compartments
if the headset will not be used for
extended periods of time.
