![background image](http://html1.mh-extra.com/html/sennheiser/hdvd-800/hdvd-800_instruction-manual_1239926014.webp)
Using the HDVD 800
13 |
HDVD 800
Selecting an audio source
왘
Use the input selection rotary switch to select your connected audio
source.
o
WARNING
Danger of hearing damage!
In order to protect your hearing, before switching to a different
audio source, first set the volume on the headphone amplifier to a
low level. Different signal sources and different listening material
(e.g. different pieces of music on different CDs) can have widely
varying signal levels. In the case where you switch to a higher level
signal source from a lower one without first reducing the volume
level this can lead to high volume levels in the headphones and
could damage your hearing.
왘
Set the volume on the headphone amplifier to a low level (see
page 14) before switching to a different audio source.
Switch position
Selected input on the
headphone amplifier
AES
XLR-3: AES/EBU (digital)
COAX
Coaxial (digital)
OPT
Optical (digital)
USB
USB (digital)
UNBAL
RCA (analog)
BAL
XLR-3 (analog)
2
1
3
4