![background image](http://html1.mh-extra.com/html/sennheiser/hdr-195/hdr-195_instruction-manual_1240625022.webp)
Using your RS 195 headphone system
20 |
RS 195
Using your RS 195 headphone system
Switching your wireless headphone system on
1
Switch your audio source on.
If you are using the headphone socket (see page 14) to connect to your
audio source, adjust the volume of the headphone socket on your audio
source (e.g. TV) to at least the medium level.
2
Push the
AUDIO INPUT SELECTION
switch up or down to select your
audio source (see page 21).
The status LED
on the transmitter lights up green.
3
Press and hold the HDR power button
for approx. 2 seconds to switch
the headphones on.
The transmitter in standby mode recognizes the active paired head-
phones and automatically transmits a signal. The status LEDs on the
transmitter and the headphones light up green.
WARNING
Danger due to high volume levels!
Listening at high volume levels can lead to permanent hearing
defects.
왘
Before putting the headphones on and before toggling between
your audio inputs, adjust the volume on the headphones to a
low level. Toggling between different inputs may cause an enor-
mous volume jumps that can damage your hearing.
왘
Do not expose yourself to high volume levels for long periods of
time.
VOLUME
If the headphones are brought outside the transmission range or if
there is no audio signal received from the transmitter for more than
5 minutes, the headphones switch off automatically.
2s
ON
ON
3
2
1
Digital
Analog
AUTO-ON
Summary of Contents for HDR 195
Page 1: ...Digital Wireless Headphone System RS 195 Instruction Manual...
Page 2: ......
Page 37: ......