Sennheiser HDR 145, Instruction Manual

Page: 13 / 20

Using the HDR 145
9
found, the channel search stops. You hear the signal of the
found sound source.
If you do not hear the sound source after a short while, please
refer to the chapter “If a problem occurs ...” on page 12.
Switching the headphones off
Searching for a sound source
왘
Make sure that the operation indicator on the transmitter
is lit.
If you do not hear the desired sound source, continue the
search:
왘
If you cannot find your sound source, please refer to the
chapter “Changing the transmission channel” in the
RS 145 comfort instruction manual.
Adjusting the volume
왘
Use the volume control
2
to adjust the volume to a
sufficient and comfortable level.
왘
Set the ON/OFF switch
5
on the headphones
to the position OFF .
The headphones switch off.
왘
Press the TUNE button
3
on the headphones
until you have found your sound source.