background image

15

Manufacturer Declarations

Warranty regulations

The guarantee period for this Sennheiser product is 60 months from the
date of purchase. Excluded are accessory items, rechargeable or
disposable batteries that are delivered with the product; due to their
characteristics these products have a shorter service life that is
principally dependent on the individual frequency of use. 
The guarantee period starts from the date of original purchase. For this
reason, we recommend that the sales receipt be retained as proof of
purchase. Without this proof (which is checked by the responsible
Sennheiser service partner) you will not be reimbursed for any repairs
that are carried out. 

Depending on our choice, guarantee service comprises, free of charge,
the removal of material and manufacturing defects through repair or
replacement of either individual parts or the entire device.
Inappropriate usage (e.g. operating faults, mechanical damages,
incorrect operating voltage), wear and tear, force majeure and defects
which were known at the time of purchase are excluded from guarantee
claims. The guarantee is void if the product is manipulated by non-
authorised persons or repair stations. 

In the case of a claim under the terms of this guarantee, send the device,
including accessories and sales receipt, to the responsible service
partner. To minimise the risk of transport damage, we recommend that
the original packaging is used. Your legal rights against the seller,
resulting from the contract of sale, are not affected by this guarantee. 
The guarantee can be claimed in all countries outside the U.S. provided
that no national law limits our terms of guarantee.

Summary of Contents for HD 46





















Reviews: