17
Replacing the connecting cable
Replace the connecting cable if it is damaged. To do so,
please proceed as follows:
씰
Remove the ear cushion. Grasp behind the ear cushion
and pull it up and away from the earcup.
씰
Loosen the screw
and remove it.
씰
Remove the cover from the earcup
.
씰
Pull the connector
out of the socket.
씰
Remove the antikink protection of the connecting cable
from the holding device
.
씰
Insert the antikink protection of the new connecting
cable into the holding device.
씰
Plug the connector
of the new connecting cable into
the socket as shown in the diagram on the left.
씰
Put the cover back onto the earcup
.
씰
Replace the screw
and tighten it.
씰
Slide the ear cushion onto the earcup.
Converting the headphones into a headset
If you wish to convert your headphones into a headset,
please contact your Sennheiser service partner who will
equip the headphones with a microphone.
HD 280 BDA 6.6.02
06.06.2002, 9:49 Uhr
17