background image

FO-TX 2-EC, FO-TX 2-OPT, FO-RX 2-EC

07/2013

2/10

Safety instructions

Read this instruction manual

Keep this instruction manual. Always include this instruction manual when passing the product on to 
third parties.

Heed all warnings and follow all instructions in the instruction manual.

Do not clean the product with abrasives.

Do not place the product near any heat sources such as radiators, stoves or other devices (including 
amplifiers) that produce heat.

Only use attachments/accessories specified by Sennheiser.

Refer all servicing to qualified service personnel. Servicing is required if the product has been damaged 
in any way, objects have fallen inside, or the product does not operate properly.

To reduce the risk of short circuits, do not use the FO-RX 2-EC near water and do not expose it to rain or 
moisture.

The FO-TX 2-EC and FO-TX 2-OPT are weather-proof, but should not be exposed to extreme conditions, 
and should not be left standing in water.

Rechargeable cells should be disposed of in a dedicated battery recycling facility.

Replacement parts

When replacement parts are required, be sure the service technician uses replacement parts specified by
Sennheiser. Unauthorized solutions may result in fire, electric shock, or other hazards.

Intended use

Intended use of the product includes:

Having read these instructions especially the chapter “Safety instructions“.

Using the products within the operating conditions.

“Improper use” means using the products other than as described in this instruction manual, or under
operating conditions which differ from those described herein.

Delivery includes

FO-TX 2-EC and FO-TX 2-OPT

13 amp  Neutrik powerCON

Instruction manual

Note:

 The internal V-lock battery is not incluced in the delivery (see also on page 5).

FO-RX 2-EC

Sennheiser NT1-1 UK power supply unit (13.8 V

DC

/2A), Article No. 503874

DC link cable for powering the ASA 1 active antenna splitter

Instruction manual

Summary of Contents for FO-RX 2-EC











Reviews: