background image

3

 

 

To avoid damage to your auditory canals and eardrum: 

 

Place a suitable earbud on the earphone (S, M or L). Never insert the 
earphone without pads! 

 

Always insert and remove the earphone from the auditory canal 
slowly and carefully! Do not insert the earphone too far into the ear! 

 

Always keep the earphone dry. 

To prevent accidents 

 

Do not use the headset in environments in which particular attention 
must be paid (e.g. on roads or while carrying out manual work). 

General instructions 

 

Never disassemble or modify components of the FLX 70. 

 

The built-in rechargeable battery may present a fire or chemical burn 
hazard if mistreated. Therefore, do not disassemble, heat above 40 °C 
(104 °F) or incinerate the rechargeable battery. 

 

Sennheiser Communications is not liable for damages resulting from 
the loss of connection due to a run flat battery, an old battery or ex-
ceeding the transmitting range. 

Before operation 

 

Use the FLX 70 in dry places only and keep liquids and small electri-
cally conductive parts away from the FLX 70 and its connecting sock-
ets. 

 

Do not expose the FLX 70 to extreme temperatures. Normal operating 
temperatures are 10 °C (50 °F) to 40 °C (104 °F). 

 

Store the headset in a clean, dust-free environment.  

 

Summary of Contents for FLX 70
































Reviews: