![background image](http://html1.mh-extra.com/html/sennheiser/evolution-wireless-g3-em-100/evolution-wireless-g3-em-100_instruction-manual_1241818016.webp)
Putting the receiver into operation
15
왘
Connect the antennas. You have the following options:
– You can connect the supplied rod antennas
to the rear of the
receiver (see page 13). In this case, insert the two blanking plugs
into the holes of the blanking plate.
– You can use the AM 2 antenna front mount kit (see “Accessories
and spare parts” on page 49) and mount the rod antennas to the
blanking plate
.
To mount the receiver into a 19” rack:
왘
Slide the receiver with the mounted blanking plate
into the 19” rack.
왘
Secure the rack mount “ears”
If you are using the supplied rod antennas:
왘
Align the antennas in a V-shape to obtain the best possible reception.
Rack mounting
two receivers
When using more than one receiver, we recommend connecting
remote antennas and, if necessary, using Sennheiser antenna
accessories. Fore more information, visit the ew G3 product page
at www.sennheiser.com.
When rack mounting two receivers side by side, you can only front
mount the antennas when using the ASA 1 antenna splitter in
conjunction with the AM 2 antenna front mount kit and an addi-
tional GA 3 rack adapter (see “Accessories and spare parts” on
page 49).
We recommend using remote antennas.
Summary of Contents for evolution wireless G3 EM 100
Page 1: ...EM 100 Instruction manual...