Adjusting settings via the operating menu
29
왘
Set the desired frequency.
Selecting a frequency bank and a channel and assigning this channel a
transmission frequency
왘
Set the desired frequency bank.
왘
Set the desired channel.
왘
Set the desired frequency (MHz and kHz values).
왘
Press the jog dial.
Your settings are stored. You are back to the operating menu.
It is vital to observe the notes on frequency selection on page 33.
Select the MHz value
and confirm
Tune
B.Ch: U1. 1
Select the kHz value;
store the setting
Tune
B.Ch: U1. 1
Call up “Tune”
Advanced Menu
516.000 MHz
516
.000 MHz
Exit
Tune
Sync Settings
“Stored”
PEAK
PEAK
-10
0
-20
-30
-40
-10
0
-20
-30
-40
AF
AF
PEAK
PEAK
-10
0
-20
-30
-40
-10
0
-20
-30
-40
AF
AF
PEAK
PEAK
-10
0
-20
-30
-40
-10
0
-20
-30
-40
AF
AF
553.
000
MHz
Advanced Menu
Tune
Sync Settings
RF Power
Warnings
LCD Contrast
Reset
IP-Address
Software Revision
Exit
왘
Turn the jog dial until the “
Tune
” menu item appears.
왘
Keep the jog dial pressed until the frequency bank selection appears.
왘
Press the jog dial.
The channel selection appears.
왘
Press the jog dial.
The frequency selection appears.
왘
Press the jog dial.
Your settings are stored. You are back to the operating menu.
Set the frequency
bank and the channel
Tune
B.Ch:
U1
. 1
Set the frequency;
store the setting
Tune
Call up “Tune”
(special function)
Advanced Menu
516.000 MHz
552.300 MHz
Exit
Tune
Sync Settings
“Stored”
PEAK
PEAK
-10
0
-20
-30
-40
-10
0
-20
-30
-40
AF
AF
PEAK
PEAK
-10
0
-20
-30
-40
-10
0
-20
-30
-40
AF
AF
PEAK
PEAK
-10
0
-20
-30
-40
-10
0
-20
-30
-40
AF
AF
552
.300 MHz
B.Ch: U2. 6
