13
Using the radio microphone
To switch the radio microphone
off
:
If necessary, deactivate the lock mode (see next
section).
To switch the radio microphone on and to
deactivate the
RF signal on switch-on
(offline operation):
To
activate
the
RF signal
:
You can switch the radio microphone on and
deactivate the RF signal on switch-on
. For more
information, see next section.
Press the
ON
/
OFF
button
until “
OFF
” appears
on the display panel. The red
ON
LED
and the
MIC
button
go off. The display panel turns off.
When in the operating menu, pressing the
ON
/
OFF
button
cancel your entry (ESC function) and
return you to the current standard display.
Keep the
ON
/
OFF
button pressed until “
RF Mute
On?
” appears on the display panel.
Press the multi-function switch.
The transmission frequency is displayed but the
radio microphone does not transmit an RF signal.
The transmission icon
is not displayed.
The
MIC
button
goes off. When the pilot tone
function is activated on both radio microphone
and receiver, “
RF Mute
” appears on the receiver’s
display panel.
Use this function to save battery power or to
prepare a radio microphone for use during live oper-
ation without causing interference to existing trans-
mission links.
Briefly press the
ON
/
OFF
button
“
RF Mute Off?
” appears on the display panel.
Press the multi-function switch.
The transmission icon
is displayed again.
ON/OFF
ON/OFF
MHz
531.375
ew300 G3
MUTE
P
AF
햵
ON/OFF
