Sennheiser EK IEM G4, Instruction Manual

Page: 31 / 113

Installing the AC 41
30
Installing the AC 41
These sections contain detailed information about installing and starting
up the AC 41.
You can find information about operating the AC 41 under “Using the
AC 41”.
Connectors on the rear of the device
1
RF OUT BNC socket
• Antenna output
• See “Connecting antennas”
2
RF IN 1 to RF IN 4 BNC sockets
• Antenna input with DC OUT
• See “Connecting the AC 41 with transmitters”
3
DC IN socket
• To connect the NT 3-1 power supply unit
• See “Connecting/disconnecting the AC 41 to/from the power supply
system”
4
Strain relief for the cable of the power supply unit
• See “Connecting/disconnecting the AC 41 to/from the power supply
system”