17
Selecting the frequencies to be stored in the
channel bank “U” (variable bank) –
tunE
Via the “
tunE
” menu, you can freely select the frequencies
to be stored in the channel bank “U” (variable bank).
Via the “
CHAn
” menu, select the channel whose
frequency you want to change.
Note:
The frequencies stored in the channel bank “F” (fixed
bank) cannot be changed. When you have selected the
channel bank “F” and then select the “
tunE
” menu, the
receiver automatically switches to channel 01 of the
channel bank “U” and “U.01” briefly appears on the LC
display panel
.
To change the frequency of the selected channel, press
the
button
or the
button
.
The frequencies are tunable in 5-kHz steps within a
switching bandwidth of 36 MHz max.
Adjusting the squelch threshold –
SquELH
Via the “
SquELH
” menu, you can adjust the squelch
threshold. The squelch eliminates annoying noise during
transmission pauses or when the received RF signal gets
weaker.
Notes:
y
If the squelch threshold is adjusted too high, the
transmission range will be reduced. Therefore, always
adjust the squelch threshold to the lowest possible
setting.
y
When in the setting mode of the “
SquELH
” menu,
pressing the
button (DOWN) for more than three
seconds will switch the squelch off. “
Sql.off
” appears
on the display. If no RF signal is being received, hissing
noise will occur. This setting is for test purposes only.
Activating/deactivating the automatic
receiver switch-on/off via the camcorder –
Auto
Via the “
Auto
” menu, you can activate or deactivate the
automatic receiver switch-on/off via the camcorder.
Setting
Function
Aut.on
Automatic receiver switch-on/off via
the camcorder is activated
Aut.oFF
Automatic receiver switch-on/off via
the camcorder is deactivated