42
19 Changing the receiving frequency
씰
Briefly press the SET button
three times
.
The display now indicates the preset receiving frequency in alternation
with the channel number assigned. (If no channel number has been
assigned, three „hyphens“ appear on the display):
씰
With the
/
buttons you can now select a different frequency. The
display always jumps to the next fixed frequency setting in the program.
씰
When you get to the desired frequency, press the SET button for about
1 second. Your entry is confirmed by the fact that „Sto“ briefly appears
on the display.
Only now does the receiver change to the new frequency
, any existing
RF link to a transmitter on the previous frequency is interrupted. The
display then switches back to the preset standard display (display of
receiving frequency or channel number)(
see chapter 16).
Notes
씰
You can discontinue the programming of this menu at any time. Press the
SET button to change to the next menu or
briefly
press the ON/OFF
switch to discontinue your entry. The cancellation is briefly confirmed on
the display with „ESC“. The display then switches back to the standard
display (
see chapter 16).
씰
After about 15 seconds, the receiver automatically returns to normal
operation if no entry has been made during this period. Here, too, „ESC“
flashes briefly.