1. Plug in earphones or an inductive neck loop to the 3.5 mm
audio port on the side of the receiver
2. Switch receiver on using On/Off switch on the top of the
device
3. Ensure receiver is on channel 1 by using the channel
selection buttons
4. Insert your earphones or connect your hearing aid to the
inductive neck loop
5. Adjust the volume up and down using the rotary volume
control button to suit your own needs
o
Please note audio may not be present until the event begins
o
If you need any assistance, please return to the information
point on green concourse or speak to a steward
Please return your receiver to the
information point on green concourse after
the event
