Sennheiser Digital 6000 Series, Instruction Manual

Page: 9 / 111

Digital 6000 | 7
EN
DE
FR
IT
ES
PT
NL
PL
SE
DK
FI
GR
TR
RU
ZH
KO
JA
COMPLIANCE
Specifications
System
Frequency range 470 - 714 MHz
Transmission system Digital modulation,
Long Range Mode (LR):
Min. frequency spacing for equidistant grid: 400 kHz
Link Density Mode (LD):
Min. frequency spacing for equidistant grid: 200 kHz
Audio codec LR Mode: SeDAC (Sennheiser Digital Audio Codec)
LD Mode: SePAC (Sennheiser Performance Audio Codec)
Dynamic range 111 dB (A) typ.
Latency Analog audio out:
Digital audio out:
3 ms (LR) / 3.2 ms (LD)
3 ms (LR) / 3.2 ms (LD) (AES/EBU)
Total harmonic distortion
(THD)
< 0.03 % (@ 1 kHz)
Encryption AES 256
Temperature Operation:
Storage:
-10°C to +50°C
-25°C to +70°C
Relative air humidity Operation:
Storage:
Max. 85% at 40°C (non-condensing)
Max. 90% at 40°C (non-condensing)
Dripping and splashing
liquids
The product must not be exposed to dripping and splashing (IP2X)
EM 6000, EM 6000 DANTE
Receiving channels 2
Receiver principle Double superheterodyne
Diversity True bit diversity
Frequency range 470 - 714 MHz
Sensitivity -100 dBm typ.
Image rejection > 100 dB typ.
Blocking > 80 dB typ.
Audio frequency response LR Mode: 30 Hz - 20 kHz (1.5 dB)
LR Mode: 30 Hz - 14 kHz (1.5 dB)
Analog audio outputs XLR-3 and 6.3 mm jack per channel (transformer balance),
-10 dBu to +18 dBu in steps of 1 dB (2 kΩ)
Digital audio outputs AES3-2003, XLR-3:
Dante™, RJ-45:
48 kHz, 96 kHz, 24 bit
48 kHz, 96 kHz, 24 bit
Can be externally synchronized using WCLK loop-through with BNC sockets
Headphone output 6.3 mm jack, 2x 100 mW at 32 Ω
Antenna inputs 2x BNC (50 Ω)
Daisy chain outputs 2x BNC (50 Ω)
0 dB +/- 0.5 dB amplification relative to antenna inputs
Daisy-chained receivers (RF) Max. 8 EM 6000 units
Booster supply voltage 12 V
3
, max. 200 mA each via antenna sockets, short circuit proof
Word clock input BNC, 75 Ω
Word clock output BNC, 75 Ω