![background image](http://html1.mh-extra.com/html/sennheiser/bt-t100/bt-t100_instruction-manual_1242899015.webp)
Bluetooth
® Audio Transmitter | 13
Getting started
Pairing the transmitter to the headphones
CAUTION
Danger of malfunction!
The transmitted radio waves of
Bluetooth
devices can impair
the operation of sensitive and unprotected devices.
X
Only use
Bluetooth
devices in locations where wireless
transmission is permitted.
The transmitter can save the connection profiles of up to eight
Bluetooth
headphones. If you pair the transmitter to the ninth headphones, the saved
connection profile of the least used headphones will be overwritten.
If you are watching/listening from your home entertainment system, the
transmitter can connect to up to 2 headphones simultaneously.
Pairing the transmitter to the headphones
1. Set your headphones to pairing mode.
If you are using Sennheiser headphones, the headphones’ LED usually
flashes blue and red during pairing.
2. Press the the Multifunction button on the transmitter for 4 seconds.
The transmitter goes into pairing mode and the LED flashes blue and
red. If pairing is successful, the LED flashes and then lights up blue for
approximately 3 minutes.
2
1
OFF
Set to pairing mode
4s
Hold
Pairing
Connected
... 3min
If no connection is established within 5 minutes, pairing mode is
terminated and the transmitter goes into standby mode. If necessary,
repeat the pairing procedure.