Operating a delegate unit
4 |
ADN C1/ADN D1
Operating a delegate unit
Taking the floor/Making a request to speak
If the conference mode is set to “
Direct Access
” or “
Override
” (for fur-
ther information, refer to the detailed instruction manual for the over-
all system “ADN Conference System”):
왘
Press the microphone key
.
Your microphone switches on and you can take the floor immedi-
ately. The microphone LED
and the signal light ring
light up
red. The loudspeaker
is muted. Depending on the conference
mode and the speaker limit set, the microphone of the previous
speaker will be deactivated.
If the conference mode is set to “
Push To Talk
”:
왘
Press the microphone key
and keep it pressed for the duration
of your contribution.
Your microphone switches on and you can take the floor immedi-
ately. The microphone LED
and the signal light ring
light up
red. The loudspeaker
is muted.
If the conference mode is set to “
Request
”, you have to be granted
speaking privileges:
왘
Press the microphone key
.
Depending on the setting adjusted in the operating menu (for fur-
ther information, refer to the detailed instruction manual for the
overall system “ADN Conference System”)
– the microphone LED
flashes green and the signal light ring
flashes red or
– only the microphone LED
flashes green.
When the chairperson grants you speaking privileges, your micro-
phone is activated. The microphone LED
and the signal light
ring
light up red. The loudspeaker
muted. Depending on the
conference mode and the speaker limit set, the microphone of the
previous speaker will be deactivated.
KA_ADN-DUs_xxxxxx_0911_SP13.book Seite 4 Mittwoch, 31. August 2011 1:32 13
