![background image](http://html.mh-extra.com/html/sennheiser/119-3011-0610/119-3011-0610_instruction-manual_1240162016.webp)
Getting started
16 | Sennheiser TV Clear Set
Connecting the transmitter with the optical cable
▷
Insert the slim end of the optical cable into the transmitter and
connect the wider end of the optical cable into the OPTICAL
DIGITAL AUDIO OUTPUT of your TV (or audio source).
Connecting the transmitter with the analog cable
▷
Connect one end of the analog 3.5 mm audio cable into the trans-
mitter and the other end into the AUDIO OUT port of your TV (or
audio source).
Connecting the TV Clear earbuds with the transmitter
▷
Follow the steps in the chapter “Connecting your earbuds to the
transmitter „TV Connector“” (> 19).
If your TV loudspeakers switch off when connected with the
analog 3.5 mm audio cable, use the optical audio cable instead
or check the menu of your TV to turn on the TV loudspeakers
again.