Cleaning Unmated SN Assemblies
1
Open the lid on the end cap and insert the SN duplex connector.
2
Push the cleaner forward 1X until you hear the audible CLICK sound.
TYPICAL PERFORMANCE
1
2
Cleaning In Adapter SN and Transceiver Ports
It is important to always clean both ends of the connector pair
before mating to prevent accidental avoid cross contaminating both end faces.
1
Remove end cap and insert yellow barrel of the cleaner into the
adapter port or the transceiver port.
1
2
Push the cleaner forward 1X until you hear the audible CLICK sound.
2
SN End Face 1
1. End face is touched to a finger tip
and plugged into adapter.
2. Cleaner is engaged one time and
checked to the IEC 61300-3-35 spec.
SN End Face 1 Cleaned 1X
SN End Face 2 Cleaned 1X
SN End Face 2
America
USA EAST 1-888-32-SENKO
USA WEST 1-858-623-3300
TEXAS 1-972-661-9080
South America
55-21-3736-7065
Asia
HONG KONG +852-2121-0516
SH86-21-5830-4513
SH86-755-2533-4893
Europe
44 7939364565
G49(0)15117683072
ITALY +39 338 8919089
AUS61 (0) 3 9755-7922
Middle East North Africa
DUBAI +971 4 8865160
Japan
TOKYO +81 (0) 3 5825-0911
SPAIN & PO34 678042829
UK +44 (0) 1256 700880
OTHER +44(0) 1256 700880
